Water Heater Repair Chattanooga Blog
Our blog is designed to give homeowners as much information on general plumbing repair tips, not just Chattanooga water heater repair advice. Many home plumbing maintenance tasks homeowners can be well equipped to take care of themselves. Enjoy!
Ok, so it is not a glamorous water heater upkeep job, however it does require a little cleaning up from time to time. Yes, today Water Heater Repair Chattanooga is going to instruct one on the best ways to eliminate a water heater. Some suggest doing this once every one to three years, we feel it is best to do so when a year. Doing so is not a tough or time consuming job – heck, let the children assist even.
Why Flush a Chattanooga Water Heater?
If it is last the suggested life expectancy of the device, it should have some kind of regular flushing done. Doing this will undoubtedly assistant in having it run as effectively as possible, which also indicates saving money on the expenditure of running the darn thing. That alone should be a good enough reason we feel!
In regards to water heater maintenance, flushing it will do away with the accumulation of mineral deposits that natural happens inside the water storage tank. If one has ever had loud sounds, popping, gurgling, mini-explosion noises, that is an indicator that there is too much sediment inside the tank. This flushing procedure will assist make certain that the tank warms water far more quietly.
Step 1. If it is an electric water heater, turn the power off in the main electric breaker box and turn the cold water supply off. If it is a gas heater, it is ok to leave the gas on – just turn the water off. Though, turn the thermostat setting dial to the pilot setting (make a note to remember exactly what it was initially set at though for later on). Then, whichever faucet the water heater supplies is closest requires to be opened. This is usually much easier than opening the pressure relief valve, but one can do that rather.
Step 2. At the bottom of the water heater is a drain valve that a yard watering hose can be connected to. There might be a cover over it depending on the maker. Consider turning the heat to the pilot setting numerous hours before flushing it if one desires so the water isn’t going to be as hot when it is drained. If that is not an alternative that’s great, simply ensure the yard hose utilized is in good condition to withstand the higher temperature water.
Run the hose outside far from the house or if the water has cooled, one can drain the tank into containers.
Step 3. Open the water heater’s drain valve and start draining the water. For whatever reason the drain valve is usually made of plastic, so if one has an older water heater (and one that has actually not been drained since before time started) it may stick a little. Just be careful to not break the plastic (which is why it would be good if the darn thing was NOT made of plastic).
When the drain valve is open, likewise open the pressure relief valve on the unit. Water will (a minimum of it must if it pressure relief valve is working properly) flow some from it. Try to let is stream stable and not too quick so it stirs up the sediment in the water heater. We want the sediment to drain out the bottom from the hose.
If draining in a bucket, even if having the hose drain into a container beyond the garage or basement where the water heater is found, fill a container and let it sit to see if the water is clear or if there is sediment, which will usually look like sand in the bottom of the container. Simply keep draining it till the water is clear.
Step 4. Close the drain on the bottom of the tank and close the pressure relief valve if it is still open.
Step 5. Turn the water supply on again to fill the tank. Once it is full once more, slowing open the pressure relief valve once again to get some excess air out of the tank. Then, open a hot water faucet in the home to get much more air out of the system.
Step 6. Let the hot water in the bathtub run up until a complete stream is streaming out. When that takes place, it is ok to turn the power back on if it is an electric water heater, or reset the temperature level setting for a gas water heater. Certainly, turn the bathtub faucet off. In about 20 minutes, the hot water ought to be heated up once more.
There you go! Water Heater Repair Chattanooga TN is here to answer any concerns you might have. Next take a look at our post on what to do if one has no hot water.
Let us break down the conversation on why one might not have any hot water from the water heater into 2 different sections: having NO hot water and having LIMITED hot water.
In regards to having no hot water at all, Water Heater Repair Chattanooga recommends that it is probably due to the fact that of one of the following 4 various possibilities (a minimum of it is most likely just one). Right here they are …
A Bad Pilot Light
Ideally this is the case due to the fact that it is the most convenient of the 5 to take care of. First check to see that it is still lit. One might require to take a look at the owners manual (sorry guys, but sometimes we should read instructions) if you are having a tough time discovering where it is located. Manufacturers due have the tendency to conceal them nowadays it seems. And, to see what the manufacturers directions are for relighting the pilot light.
Gas Line Leak
If one has a gas water heater, there may be a leakage in the line. If one has an electric one, clearly disregard this as a possibility. Some people have a difficult time smelling gas, though my mom has an incredible ability to smell it I vividly remember as a child. It most likely will have the odor of rotten eggs. If this holds true, all jokes aside, turn the gas line off if one knows where it is and call the gas company and/or a plumbing company if one does not reside in Hot Water Heater Repair Chattanooga’s service area. This is a serious problem that requires instant attention!
A Bad Thermostat
This could be the concern for both not having any hot water, or just not having enough hot water. To be on the safe side we included it in this section though. Make sure the thermostat dial settings have actually not been bummed or altered by mishap. Our water heater is located in the garage and the happy fingers of twin children like to go exploring every now and then. If the
settings are what they usually are, turn the setting up some and see if it does the trick. The thermostat can be changed for they do wearsometimes.
A Bad Thermocouple
For gas water heaters, the thermocouple works in hand with the pilot light as a safety device. If the pilot light is out, it avoids gas from being turned on, so it is sort of important. Nevertheless, easy to alter if required. When the thermocouple starts to wear out, it “informs” the gas valve that the pilot light is out so it shuts off the gas. The gas burner will not light then and the pilot goes out.
For electric water heaters, it uses a heating element inside to perform the electrical current heating the water. These can also wear out and will result in decreased hot water.
Not Enough Hot Water
If one is not in the routine of flushing the water heater tank regularly, like a minimum of once every couple years, sediment from the water will buildup in the bottom of the tank. If one ever hears popping or banging noises from the tank, that is most likely why. This will ultimately minimize the heaters ability to make sufficient hot water. Routine flushing will usually resolve this trouble. If the water in the house is extremely hard, utilizing a water softener will assist combat an excess quantity of sediment buildup too.
Various Other Possibilities
There could be an issue with the flame from the burner. Please see to it the location around and beneath the water heater stays clean from dirt. The water heater draws air up from beneath for the burner. Natural gas flames will burn bright blue with a yellow tip, while propane are more bluish green on the body of the flame.
It might hold true that the tank size is simply too small and not able to manage the water heating needs, however clearly if it is a new issue of inadequate hot water and ones usage level has actually not drastically increased, this will not hold true.
If any recent repairs were made on the system something could be crossed in terms of the electrical connections or the hot and cold water connects, but once more, pretty unlikely from a lot of plumbing companies.
There are various other possible causes, however for the sake of time here, Water Heater Repair Chattanooga TN just wished to share the most probably ones. Do not hesitate to let us know of any support required!
We just made a brand-new business video overview for Water Heater Repair Chattanooga and we wished to share it with you today. Do not think twice to contact us for any plumbing repairs and installments that you may have to have done at work or at home.